Sunday, September 14, 2008

The Law of Charts

At Trading Educators we only use Price and Volume Charts to identify high probability trades. The Law of Charts™ describes only four chart formations on the price charts which present trading opportunities, then specifies entry and exit targets based upon those four chart formations. In the following we will present you these four major chart formations and how to trade them.

Please note: The Law of Charts is not a trading method, nor is it a trading system. It serves to identify the chart formations that form as a result of human behavior in the markets. These chart formations give the trader an indication of when, at what price target, and how (long or short) to enter the market.

The Laws of Charts

1-2-3 HIGHS AND LOWS

A typical 1-2-3 high is formed at the end of an up-trending market. Typically, prices will make a final high (1), proceed downward to point (2) where an upward correction begins; then proceed upward to a point where they resume a downward movement, thereby creating the pivot (3). There can be more than one bar in the movement from point 1 to point 2, and again from point 2 to point 3. There must be a full correction before points 2 or 3 can be defined.

A number 1 high is created when a previous up-move has ended and prices have begun to move down.

The number 1 point is identified as the last bar to have made a new high in the most recent up-leg of the latest swing.

The number 2 point of a 1-2-3 high is created when a full correction takes place. Full correction means that as prices move up from the potential number 2 point, there must be a single bar that makes both a higher high and a higher low than the preceding bar or a combination of up to three bars creating both the higher high and the higher low. The higher high and the higher low may occur in any order. Subsequent to three bars we have congestion. Congestion will be explained in depth later on in the course. It is possible for both the number 1 and number 2 points to occur on the same bar.

The number 3 point of a 1-2-3 high is created when a full correction takes place. A full correction means that as prices move down from the potential number 3 point, there must be at least a single bar, but not more than two bars that form a lower low and a lower high than the preceding bar. It is possible for both the number 2 and number 3 points to occur on the same bar.

Now, let’s look at a 1-2-3 low.

A typical 1-2-3 low is formed at the end of a down-trending market. Typically, prices will make a final low (1); proceed upward to point (2) where a downward correction begins; then proceed downward to a point where they resume an upward movement, thereby creating the pivot (3). There can be more than one bar in the movement from point 1 to point 2, and again from point 2 to point 3. There must be a full correction before points 2 or 3 can be defined.

A number 1 low is created when a previous down-move has ended and prices have begun to move up. The number 1 point is identified as the last bar to have made a new low in the most recent down-leg of the latest swing.

The number 2 point of a 1-2-3 low is created when a full correction takes place. Full correction means that as prices move down from the potential number 2 point, there must be a single bar that makes both a lower high and a lower low than the preceding bar, or a combination of up to three bars creating both the lower high and the lower low. The lower high and the lower low may occur in any order. Subsequent to three bars we have congestion. It is possible for both the number 1 and number 2 points to occur on the same bar.

The number 3 point of a 1-2-3 low exists when a full correction takes place. A full correction means that as prices move up from the potential number 3 point, there must be at least a single bar, but not more than two bars, that form a higher low and a higher high than the preceding bar. It is possible for both the number 2 and number 3 points to occur on the same bar.

The entire 1-2-3 high or low is nullified when any price bar moves prices equal to or beyond the number 1 point.

Ledges

A LEDGE CONSISTS OF A MINIMUM OF FOUR PRICE BARS. IT MUST HAVE TWO MATCHING LOWS AND TWO MATCHING HIGHS. THE MATCHING HIGHS MUST BE SEPARATED BY AT LEAST ONE PRICE BAR, AND THE MATCHING LOWS MUST BE SEPARATED BY AT LEAST ONE PRICE BAR.

The matches need not be exact, but should not differ by more than three minimum tick fluctuations. If there are more than two matching highs and two matching lows, then it is optional whether to take an entry signal from either the latest price matches in the series (Match ‘A’) or those that represent the highest and lowest prices of the series (Match ‘B’). [See below]

A LEDGE CANNOT CONTAIN MORE THAN 10 PRICE BARS. A LEDGE MUST EXIST WITHIN A TREND. The market must have trended up to the Ledge or down to the Ledge. The Ledge represents a resting point for prices, therefore you would expect the trend to continue subsequent to a Ledge breakout.

TRADING RANGES

A Trading Range (See below) is similar to a Ledge, but must consist of more than ten price bars. The bars between ten and twenty are of little consequence. Usually, between bars 20 and 30, i.e., bars 21-29, there will be a breakout to the high or low of the Trading Range established by those bars prior to the breakout.

ROSS HOOKS

A Ross Hook is created by:

1. The first correction following the breakout of a 1-2-3 high or low.
2. The first correction following the breakout of a Ledge.
3. The first correction following the breakout of a Trading Range.

In an up-trending market, after the breakout of a 1-2-3 low, the first instance of the failure of a price bar to make a new high creates a Ross Hook. (A double high/double top also creates a Ross Hook).

In a down-trending market, after the breakout of a 1-2-3 high, the first instance of the failure of a price bar to make a new low creates a Ross Hook. (A double low/double bottom also equals a Ross Hook).

If prices breakout to the upside of a Ledge or a Trading Range formation, the first instance of the failure by a price bar to make a new high creates a Ross Hook. If prices breakout to the downside of a Ledge or Trading Range formation, the first instance of the failure by a price bar to make a new low creates a Ross Hook (A double high or low also creates a Ross Hook).

We’ve defined the patterns that make up the Law of Charts. Study them carefully.

What makes these formations unique is that they can be specifically defined. The ability to formulate a precise definition sets these formations apart from such vague generalities as “head and shoulders,” “coils,” “flags,” “pennants,” “megaphones,” and other such supposed price patterns that are frequently attached as labels to the action of prices.

TRADING IN CONGESTION

Sideways price movement may be broken into three distinct and definable areas:

1. Ledges - consisting of no more than 10 price bars
2. Congestions - 11-20 price bars inclusive
3. Trading Ranges - 21 bars or more with a breakout usually occurring on price bars 21-29 inclusive.

Trading Ranges consisting of more than 29 price bars tend to weaken beyond 29 price bars and breakouts beyond 29 price bars will be:

  • Relatively strong if the Trading Range has been growing narrower from top to bottom (coiling).
  • Relatively weak if the Trading Range has been growing wider from top to bottom (megaphone).

We have written considerable material about breakouts from Ledges, primarily that since by definition, Ledges must occur in trending markets, the breakout is best traded in the direction of the prior trend, once two matching highs and two matching lows have taken place.

The next discussion deals primarily with Congestions and Trading Ranges:

Under the topic of the Law of Charts, we have defined the first correction following the breakout of a Trading Range or Ledge as being a Ross Hook.

The same is true after a breakout from Congestion, i.e., the first retracement (correction) following a breakout from Congestion also constitutes a Ross Hook.

A problem most traders have in dealing with sideways markets is determining when prices are no longer moving sideways and have indeed begun to trend. Apart from an outright breakout and correction which defines a Ross Hook, how is it possible to detect when a market is no longer moving sideways, and has begun to trend?

In other writings, we have stated that the breakout of the number 2 point of a 1-2-3 high or low formation ‘defines’ a trend, and that the breakout of the point of a subsequent Ross Hook ‘establishes’ the trend previously defined.

1-2-3 high and low formations may be satisfactorily traded using the Trader’s Trick entry. All Ross Hooks may be satisfactorily traded using the Trader’s Trick entry.

However, while a 1-2-3 formation occurring in a sideways market still defines a trend, the 1-2-3 formation, when it occurs in a sideways market, is not satisfactorily traded using the Trader’s Trick. This is because Congestions and Trading Ranges are usually composed of opposing 1-2-3 high and low formations.

If a sideways market has assumed an // formation, or is seen as a // formation, these formations will more often than not consist of a definable 1-2-3 low followed by a 1-2-3 high, or a 1-2-3 high followed by a 1-2-3 low. In any event, the breakout of the number 2 point is usually not a spectacular event, certainly not one worth trading.

What is needed is a tie-breaker. The tie-breaker will not only increase the likelihood of a successful trade, but will also be a strong indicator of the direction the breakout will most probably take. That tie-breaker is the Ross Hook.

When a market is moving sideways, the trader must see a 1-2-3 formation, followed by a Ross Hook, all occurring within the sideways price action. The entry is then best attempted by using the Trader’s Trick ahead of a breakout of the point of the Ross Hook.

Of course, nothing works every time. There will be false breakouts. However, on a statistical basis, a violation of a Ross Hook occurring when price action is sideways, consistently results in a low risk entry with a heightened probability for success. Since the violation of a Ross Hook occurring in a sideways market is an acceptable trade, then an entry based upon a Trader’s Trick entry ahead of the point of the Ross Hook being violated offers an even better entry.

POINTS OF CLARIFICATION FOR 1-2-3 FORMATIONS

We have had a number of people ask about the trading of the 1-2-3 high or low formation.

They ask, “When do you buy and when do you sell?”
Although we prefer to use the Trader’s Trick entry whenever possible (See Appendix B), the illustration should be of help when not using the Trader’s Trick.

The Breakout of a 1-2-3 High Or Low

Let's illustrate what a 1-2-3 is:

Sell a breakout of the # 2 point of a 1-2-3 high

===============================================

Buy a breakout of the # 2 point of a 1-2-3 low

Note: The #3 point does not come down as low as the #1 point in a uptrend, or as high as the #1 point in a down trend. We set a mental or computer alert, or both, to warn us of an impending breakout of these key points. We will not enter a trade if prices gap over our entry point. We will enter it only if the market trades through our entry point.

1-2-3 Highs and Lows come only at market turning points that are in effect major or intermediate high or lows. We look for 1-2-3 lows when a market seems to be making a bottom, or has reached a 50% or greater retracement. We look for 1-2-3 highs when a market appears to be making a top, or has reached a 50% or greater retracement.

Exact entry will always be at or prior to the actual breakout taking place.

POINTS OF CLARIFICATION FOR ROSS HOOKS

We are asked the same question with regard to the Ross Hook as we are about 1-2-3 formations: “When do I buy, and when do I sell?” Our answer is essentially the same as for the 1-2-3 formation. Although we prefer entry via the Trader’s Trick (See Appendix B), such entry is not always available. When the Trader’s Trick entry is not available, enter on a breakout of the point of the Ross Hook itself.

Buy on a breakout of the point of the Ross Hook.

But keep in mind this warning: When the point of a Ross Hook is taken out, it very often is nothing more than stop running, and the breakout will be a false one.

Sell on a breakout of the point of the Ross Hook.

Some comments about the series of graphs that follow might clear up a few questions:

This is important! Prices make a double top at the last Ross Hook shown, and then retreat. Many professional traders would go short as soon as they felt the double top was in place.

Notice that we are able to connect a True Trend line from the point of the lower Ross Hook to the correction low that gave us the #3 point, and then to the correction low that created the double top Ross hook.

That leaves us with a 1-2-3 low and a Ross Hook in the event of a breakout to the upside. It also leaves us with a 1-2-3 high and a Ross hook in the event of a breakout to the downside. A breakout of the double top (Rh) will set us up for any subsequent upside Ross Hooks if prices take out the double resistance area and then later correct.

The double top Ross Hook represents a low risk entry for a short position. However, in this example we will wait for an entry at the violation of the Ross Hook itself. A more advanced trader might wish to go short as prices move away from the double top. This is a low risk trade because a stop can temporarily be placed above the high. Notice we are saying temporarily. The double top could be a terrible place to have a stop should the insiders engineer a move up to run the stops they know are there.

The Trader’s Trick Entry (See Appendix B) would enable us to enter by going long earlier than waiting for the double top Ross Hook to be taken out. The more conservative trade is to use the Trader’s Trick entry, figuring that prices will at least test the high as prices move up. The Trader’s Trick Entry in this case is just above the third bar of correction. All or part of the position can be put on at the Trader’s Trick Entry point. It’s simply a matter of choice. If you want to know what our choice is, it is to place the entire position on at the Trader’s Trick Entry.

However, prices continue down and take out the lower Ross Hook. We should have had a resting sell stop below that Ross Hook as well. We can sell short all or part of our position as the lower Ross Hook itself is violated.

We see that prices are plunging. However, we should not be jumping in front of the market at each lower bar, because by the time prices take out the Ross Hook, the market will have already been moving down for four consecutive bars. If you will recall the lessons learned from our section in ELECTRONIC TRADING ‘TNT’ I on finding the trend while it is still in the birth canal, you know that the market may be getting ready to correct.

Note the intraday correction at the arrow on the right of the chart. An important event has taken place. The intraday correction makes it okay to jump in front of the market. The fact that the market opened, traded above the previous bar’s high, and then took out the previous day’s low, signifies at least one more good day to be short. If trading intraday, jump in front of the Ross Hook created by the intraday correction. In fact, if trading intraday, and it becomes available, use a Trader’s Trick Entry to enter ahead of prices taking out the previous day’s low.

We now have an intraday correction followed by a reversal bar. The market is talking! Note the gap open beyond the previous bar’s low. Then notice the price action for the remainder of the day. Professional traders will go long on a gap open like that, some of them as soon as possible after the open, and others when prices trade through the open to the upside. When you see a gap open like that in a strongly trending market, take profits. If your guts are under control, take profits and reverse. Most of the time you will be glad you did. In fact, many professionals, if they think the market is beginning to congest, will double up on a gap opening and trade twice as many contracts against the trend as they would with the trend.

The market was telling us to expect a correction. Were you listening?

When prices are correcting and prices open in the upper part of the previous bar’s range, and then move above the previous bar’s high, chances are you haven’t seen an end to the correction.

This latest price bar places the chart into a 5 bar consolidation area. We’ll place a box around that area. This area is considered to be congestion by alternation and is described in Electronic Trading ‘TNT’ III – Technical Trading Stuff.

Although not shown, you can picture that a 3x3 moving average of the close, is running through the middle of the 5 bar congestion.

You may recall from ELECTRONIC TRADING ‘TNT’ III that the 3x3 moving average is a filter for Reverse Ross Hooks. It is also a filter here for the same reasons – we are in a defined congestion by reason of alternation.

Since the trade doesn’t pass our filter because of a “gap opening beyond the low of the Rh,” we must remove any order to sell a breakout of the Rh. The gap opening below the previous bar’s range has brought in a double load of orders from the insiders.

Prices move up on a reversal day. Remember, when the insiders feel that a market is congesting or correcting, they will double their orders on openings that gap beyond the price range of the previous day. This doubling can serve as a filter for our trades, because we can expect the insiders to try to fill the gap. Day traders can use this to trade right along with the insiders who know to expect this type of price action.

As prices gap past the Rh, and then correct, we can place a sell order below the new Rh.

The following day, we get a gap opening to the upside. This time it is above the high of the previous day. It, too, will bring a double load of sell short orders. This is a correction day and so we can connect some segment lines.

Prices hit our sell stop below the Rh. Our sell stop has been placed one tick below the point of the Rh. We want a violation of the Hook before we will accept entry.

There are many problems with getting filled on a gap opening below our sell stop, the least of which is slippage. Therefore, if at all possible, we do not enter orders until we see where the open occurs. Brokers can be instructed in that manner if you have to use one for the actual placement of your order. On the chart to the left, prices opened exactly one tick below the Rh.

The next price bar makes an unusual close. We must do all we can to protect profits. There is apt to be further correction on the next price bar.

We protect profits by moving our stop one tick above the high of any bar that closes very close to the high when we feel that prices should be continuing to move down.

The correction comes intraday, creating an intraday hook situation. Day traders may have been able to scalp a few ticks of profit here.

Day traders may have been able to profit by selling under the low of the previous day. Any day trader at any time should consider a breakout of the low of the previous day a strong reason to sell short.

The correction by prices on the last bar shown gives us another Rh.

As prices correct, we try to sell a breakout of the low of the correcting bar.

The following comments apply to the chart above and the one below. We may want to put on our entire position but we have only two opportunities. It may be best to put on 2/3 of the position at the higher of the two entry points, and only 1/3 at the hook, if we are given the choice. Once prices start back down, we try for 2/3 immediately. If we still cannot get our position on, then we will have to place the entire position on at the hook. You may recall in a similar situation we looked at the 3x3 moving average of the close and considered it a filter for the trade because the 3x3 was running through a five bar consolidation. In this instance, the 3x3 moving average was still displaying containment of the downtrend.

A trade at the low is missed because of the gap opening. We then try to sell a breakout of the next low, as well as the Rh.

Our position is filled at both entry points.

The following comments apply to the chart above and the chart below: As we take profits out of the market, we come to a point where we have accumulated sufficient profits that if we wish to risk those profits, we can begin to keep our stop further away from the price action.

If we don’t want to take additional risk, then it’s best to trail a 50% stop as the market moves down, and pull stops even tighter on reversal bars, or any indication that something is amiss.

Because of the reversal bar, we tighten stops. We don’t want a win to turn into a loss.

Another intraday correction gives day traders an opportunity to sell short.

All traders can jump in front of the market and get filled as the low is taken out.

Prices break nicely to the downside.

The downtrend is fully intact. If we are willing to take more risk, we can allow our stop to lag further back.

Here we see the value in keeping our trailing stop a bit further away, once we have established acceptable profits.

In any case, we would place a sell stop below the Rh and the next correction bar, in effect opting for the Trader’s Trick.

We now have three possible selling points. Whenever we get 3 bars of correction, we move our lagging stop (if we have one) to one tick above the high of the third correction bar. This is because, if we were to get more than three correcting bars, we would have to assume that the trend is at least temporarily over, and prices may now move higher, or at the very least move into a congestion phase.

The gap open misses our highest entry point. Because it does, it would cause us to try to fill 2/3rds of our position on a breakout of the low of the gap down bar.

Once again the entry point was missed on the gap opening. We will try again for entry on the next price bar.

This bar brings a fill near the close.

At this point our entire position should be in place.

We do not need a sell order below the Rh if our entire position is in place.

Note with regard to the last four charts: An adequate trailing stop would have kept us in the market throughout the four days show on these charts. We would have been able to build a position by adding contracts.

But keep in mind that adding contracts also adds all new risk. Furthermore, the risk which is incurred may be greater in nature than the risk originally accepted. Why? Because each time we add to our position, we are closer in time to the end of the move being made.

The method of trade management that we have been showing you in this entire series of charts is here is to demonstrate to you an alternative method of trade management. It is up to the trader to decide how to manage his/her own positions. In our minds there are two basic approaches, both of which may be acceptable to some.
The first is that of putting on the entire position upon the initial entry and then liquidating portions of that position to cover costs, take a small profit, and finally to ride the trade as far as it will go with what remains of the position after partial liquidation.

The converse of this method is to build the position by entering a portion of it to test the waters. If the initial portion becomes profitable, you then add to the position by adding contractss in stages until you have put on the entire position.

Much of any acceptability depends upon your personal comfort level in handling risk, and your financial capacity for handling risk.

We’ll look at two more charts now. In actuality, the market continued downward for quite some time after the last chart below.

Here we see a reversal day. By now you should know that it usually means some sort of correction is due.

Sure enough, prices correct. We would start by trying to sell a breakout of the correction low. We would also place a sell stop below the Rh for part of our position.

Remember, it is up to you to decide how much of your position you want to place at any given level. It is a matter of comfort and style. Where do you feel best about placing your entry orders?

THE TRADER'S TRICK ONE MORE TIME

The purpose of the Trader's Trick entry (TTE) is to get us into a trade prior to entry by other traders.

Let's be realistic. Trading is a business in which the more knowledgeable have the advantage over the less knowledgeable. It's a shame that most traders end up spending countless hours and dollars searching for and acquiring the wrong kind of knowledge. Unfortunately, there is a ton of misinformation out there and it is heavily promoted. What we are trying to avoid here is the damage that can be done by a false breakout.

Typically, there will be many orders bunched just beyond the point of a Ross Hook. This is also true of the number two point of a 1-2-3 formation. The insiders are very much aware of the bunching of orders at those points, and if they can make it happen, they will move prices to where they see the orders bunched together, and then a little past that point in order to liquidate as much of their own position as possible. This action by the insiders is called “stop running.”

Unless the pressure from the outsiders (us) is sufficient to carry the market to a new level, the breakout will prove to be false.

The Trader's Trick is designed to beat the insiders at their own game, or at the very least to create a level playing field on which we can trade. WHEN TRADING HOOKS, WE WANT TO GET IN AHEAD OF THE ACTUAL BREAKOUT OF THE POINT OF THE HOOK. IF THE BREAKOUT IS NOT FALSE, THE RESULT WILL BE SIGNIFICANT PROFITS. IF THE BREAKOUT IS FALSE, WE WILL HAVE AT LEAST COVERED OUR COSTS AND TAKEN SOME PROFIT FOR OUR EFFORT.

Insiders will often engineer moves aimed at precisely those points where they realize orders are bunched. It is exactly that kind of engineering that makes the Trader's Trick possible.

The best way to explain the engineering by the insiders is to give an example. Ask the following question: If we were large operators down on the floor, and we wanted to make the market move sufficiently for us to take a fat profit out of the market, and know that we could liquidate easily at a higher level than where the market now is because of the orders bunched there, how would we engineer such a move?

We would begin by bidding slightly above the market.

By bidding a large number of contracts above the market, prices would quickly move up to our price level.

Once again by bidding a large number of contracts at a higher level, prices would move up to that next level.

The sudden movement up by prices, to meet our large-order overpriced-bid, will cause others to take notice. The others are day traders trading from a screen, and even insiders.

Their buy orders will help in moving the market upward towards where the stops are bunched. It doesn't matter whether this is a daily chart or a five minute chart, the principle is the same.
In order to maintain the momentum, we may have to place a few more buy orders above the market, but we don't mind. We know there are plenty of orders bunched above the high point. These buy orders will help us fill our liquidating sell orders when it's time for us to make a hasty exit.

Who has placed the buy orders above the market? The outsiders, of course. They are made up of two groups. One group are those who went short sometime after the high was made, and feel that above the high point is all they are willing to risk. The other group are those outsiders who feel that if the market takes out that high, they want to be long.

Because of the action of our above-the-market bidding, accompanied by the action of other inside traders and day traders, the market begins to make a strong move up. The move up attracts the attention of others, and the market begins to move up even more because of new buying coming into the market.

This kind of move has nothing whatsoever to do with supply and demand. It is purely contrived and engineered.

Once the market nears the high, practically everyone wants in on this “miraculous” move in the market. Unless there is strong buying by the outsiders, the market will fail at or shortly after reaching the high. This is known as a buying climax.

What will cause this failure? Selling. By whom? By us as big operators, and all the other insiders who are anxious to take profits. At the very least, the market will make some sort of intraday hesitation shortly after the high is reached.

If there is enough buying to overcome all the selling, the market will continue up. If not, the insiders will have a wonderful time selling the market short, especially those who know this was an engineered move. NOTE: DON’T THINK FOR ONE MOMENT THAT THERE IS NOT COLLUSION BY INSIDERS TO MANIPULATE PRICES.

What will happen is that not only will selling be done for purposes of liquidation, but also for purposes of reversing position and going short. This means the selling at the buying climax may be close to triple the amount it would normally be if there were only profit taking.

Why triple? Because if prices were engineered upward by a large operator whose real intention is to sell, he will need to sell one set of contracts to liquidate all of his buying, and perhaps double that number in order to get short the amount of contracts he originally intended to sell. The buying from the outsiders will have to overcome that additional selling.

Because of that fact, the charts will attest to a false breakout. Of course, the reverse scenario is true of a downside engineered move resulting in a false breakout to the downside.

WARNING: MOVING THE MARKET AS SHOWN IN THE PREVIOUS EXAMPLE IS NOT SOMETHING THE AVERAGE TRADER SHOULD ATTEMPT!

It is very important to realize what may be happening when a market approaches a Ross Hook after having been in a congestion area for awhile. The prior pages have illustrated this concept.

With the preceding information in mind, let's see how to accomplish the Trader's Trick.

On the chart above the Rh is the high. There were two price bars following the high: one is the bar whose failure to move higher created the Hook, and the other is one that simply furthered the depth of the correction.

Let’s look at that again by breaking it down in detail in an example.

Following the high is a bar that fails to have a higher high. This failure creates the Ross Hook, and is the first bar of correction. If there is sufficient room to cover costs and take a small profit in the distance between the high of the correcting bar and the point of the Hook, we attempt to buy a breakout of the high of the bar that created the Hook, i.e., the first bar of correction. If the high of the first bar of correction is not taken out, i.e., violated, we wait for a second bar of correction.

Once the second bar of correction is in place, we attempt to buy a violation of its high, again provided that there is sufficient room to cover costs and take a profit based on the distance prices have to travel between our entry point and the point of the Hook.

If the high of the second bar of correction is not violated, we will attempt to buy a violation the high of a third bar of correction provided there is sufficient room to cover costs and take a profit based on the distance prices have to move between our entry point and the point of the Hook. Beyond three bars in the correction, we will cease in our attempt to buy a breakout of the correction highs.

What if the fourth bar did as pictured on the left? As long as prices are moving back up in the direction of the trend that created the Ross Hook, and as long as there is sufficient room for us to cover costs and take a profit, we will buy a breakout of the high of any of the three previous correction bars. In the example, if we were able to enter before prices violated the high of the second bar of correction, we would enter on a violation of the high of the second correcting price bar. If not, and there is still room to cover and profit from a violation of the first correcting price bar, we would enter there. Additionally, we could choose to enter on a takeout of the high of the latest price bar as shown by the double arrow, even if it gaps past one of the correction bar highs.

REMINDER: ONCE THERE ARE MORE THAN THREE BARS OF CORRECTION, WE NO LONGER ATTEMPT TO ENTER A TRADE. THE MARKET MUST BEGIN TO MOVE TOWARD THE HOOK AT THE TIME OF OR BEFORE A FOURTH BAR IS MADE.

Although not shown, the exact same concept applies to Ross Hooks formed at the end of a down move.

Risk management is based upon the expectation that prices will go up to at least test the point of the Hook. At that time, we will take, or already have taken some profit and have covered costs.

We are now prepared to exit at breakeven, at the very worst, on the remaining contracts. Barring any horrible slippage, the worst we can do is having to exit the trade with some sort of profit for our efforts.

We usually limit the Trader's Trick to no more than three bars of correction following the high of the bar that is the point of the Hook. However, there is an important exception to this rule. The next chart shows the use of double or triple support and resistance areas for implementing the Trader's Trick.

Please realize that “support” and “resistance” on an intraday chart does not have the usual meaning of those terms when applied to the overall supply and demand in the market place. What is referred to here is given in the following four examples:

Any time a business can consistently make profits, that business is going to prosper. Add to that profit the huge amount of money made on the trades that take off and never look back, and it’s readily apparent that enormous profits are available from trading. The management method we use shows why it is so important to be properly capitalized. Size in trading helps enormously.

The method also shows why, if we are undercapitalized (most traders are), we must be patient and gradually build our account by taking profits quickly when they are there.

If you are not able to tend to your own orders intraday electronically or on the Internet, it may be well worth your while to negotiate with a broker who will execute your trading plan for you. There are brokers who will do this, and you may be surprised to find that there are some who will perform such service at reasonable prices if you trade regularly. When we are trading using the Trader’s Trick, we don’t want to be filled on a gap opening beyond our desired entry price unless there is sufficient room for us to still cover costs and take a profit. Can you grasp the logic of that? The reason is that we have no way of knowing whether a move toward a breakout is real or not. If it is engineered, the market will move forward to the point of taking out the order accumulations and perhaps a few ticks more. Then the market will reverse with no follow through in the direction of the breakout. As long as we have left enough room between our entry point and the point where orders are accumulated to take care of costs and a profit, we will do no worse than breakeven. Usually, we will also have a profit to show for any remaining contracts, however small. If the move proves to be real (not engineered), then the market will give us a huge reward relative to our risk and costs. Remember, commission and time are our only real investment in the trade if it goes our way.

The important understanding that we need to have about the Trader’s Trick is that by taking entry into a market at the correct point, we can neutralize the action by the insiders. We can be right and earn something for our efforts should the breakout prove to be false.

Some breakouts will be real. The fundamentals of the market ensure that. When those breakouts happen, we will be happy, richer traders.

With proper money management, we can earn something for our efforts even if the breakout proves to be false.

IDENTIFYING CONGESTION

One of the concepts every trader must learn is how to know when prices are in congestion. There are a few rules for the early discovery of this ever important price action, and they are explained in detail in this chapter.

RULE: ANY TIME PRICES OPEN OR CLOSE ON FOUR CONSECUTIVE BARS, WITHIN THE CONFINES OF THE RANGE OF A “MEASURING BAR,” YOU HAVE CONGESTION. THIS IS REGARDLESS OF WHERE THE HIGHS AND LOWS MAY BE LOCATED. A “MEASURING BAR” BECOMES SUCH BY VIRTUE OF ITS PRICE RANGE CONTAINING THE OPENS OR CLOSES OF AT LEAST 3 OF 4 SUBSEQUENT PRICE BARS.

Closely and carefully study this chart again. Congestion can be very subtle in appearance. Often the difference between congestion or trend is the positioning of a single open or close.

To further demonstrate this concept, let’s first look at the combination of points “K” through “M” on the chart below. Even though “M” closed below the range of the measuring bar “J,” the fact that “L” made a new high and then closed, dropping back into the Trading Range of “J”, tells us that prices are still in congestion. This will be explained on the following pages. In addition, we now have congestion by virtue of alternating bars, which will also be discussed next.

ANY TIME PRICES ARE NOT MAKING HIGHER HIGHS AND HIGHER LOWS, OR LOWER HIGHS AND LOWER LOWS, AND WE CAN SEE FOUR ALTERNATING BARS, AT TIMES COUPLED WITH INSIDE BARS AND AT TIMES COUPLED WITH DOJIS, WE HAVE CONGESTION.

ALTERNATING BARS ARE ONES WHERE PRICES OPEN LOWER AND CLOSE HIGHER ON ONE BAR, AND OPEN HIGHER AND CLOSE LOWER ON THE NEXT.

Inside bars look like this:

Doji Bars look like this:

Below are more Doji bars. The open and close are at the same price or very near to the same price, yielding a bar that looks like this:

A combination of alternate close-high-open-low, close-low-open-high pairs is congestion.

“Pointy” places made when the market is in congestion are not Ross Hooks. If a trend has been defined within congestion, you now have a trend, and any subsequent pointy place is a Ross Hook.

The first bar of the congestion may very well be the last bar of what had been a trend. A congestion may look similar to any of the following, as long as it consists of four or more bars. Study these formations carefully:

CONGESTIONS:

Frequently congestion will start or end with a doji. Frequently congestion will begin or end with a long bar move, or a gap.

Another way to identify congestion is when you see // or // on the chart.

The smallest possible number of bars that can make up this formation is four. Let’s see how this can be done.

In reality, we may get something that looks more like the following:

If we were to get a formation that looked like the following, the Ross Hook would be as marked. If that Hook is taken out, we would want to be long prior to the violation. Notice that the bar that created the Ross Hook was the last bar of the trend and the first bar of the congestion.

Now, let’s see if you’re really getting this. Assume that an established trend is in effect, with prices having trended up from much lower. We’ve changed the chart a bit, so pay attention.

The Ross Hook is as marked below.

Note: A 1-2-3 FOLLOWED BY A BREAKOUT OF THE #2 POINT THAT SUBSEQUENTLY RESULTS IN A ROSS HOOK, SUPERCEDES ANY CONGESTION OR PREVIOUS ROSS HOOK. QUITE OFTEN, SUCH A SERIES OF PRICE BAR OCCURRENCES WILL BE THE WAY PRICES EXIT A CONGESTION AREA, I.E, A 1-2-3 FORMATION WITHIN A CONGESTION AREA, A BREAKOUT OF THE #2 POINT, FOLLOWED BY A ROSS HOOK .

The price bar labeled “b” made a new local low. The take out by prices of the local double resistance, “a” and “b,” is a significant event. “a” and “b”, together, constitute the number two point of a 1-2-3 low occurring in congestion. The low of bar “b” is also a #3 point, and two bars later we get the highest high of the congestion, which is also an Rh.

The new Ross Hook represents an even more significant breakout point. Combined with the old Rh, there is significant resistance. Within a few ticks of each other, the two constitute a double top. If prices take them both out, we would normally expect a relatively longer term, strong move up.

We use the term “relatively” here, because the intensity and the duration of the move would be relative to the time frame in which the price bars were made. Obviously such a move on a one minute chart would hardly compare with an equivalent move on a daily chart. While we are looking at the chart, there is something else of importance to notice. Prices retreated from the resistance point, thereby creating the second Ross Hook. This represented a failure to break out. This failure is why Reverse Ross hooks are important. When prices retreat from a resistance point and move towards a RRh, it may indicate that the only reason the resistance point was challenged or even violated was because prices were “engineered” in that direction by some party or parties capable of moving prices for their own benefit. The anticipation is that prices next may move in the opposite direction toward a violation of the RRh.

Now, go through a brief review of the various congestions. All of the three following conditions that define congestion must occur without consistently making higher highs or lower lows.

Congestion by Opens/Closes: Four consecutive closes or opens within the range of a measuring bar. If opens are used, there can be no correcting bars before or coincident with the bar in which the open is used.

Congestion by Combination: A series of four consecutive dojis, or at least one doji and any three alternating bars. The doji is a wild card and can be used to alternate with any other bar. If there are three non-doji bars, one of them must alternate high-to-low with the other two non-doji bars.

Congestion by Alternation: A series of four consecutive alternating open high - close low, open low - close high bars in any sequence. This definition includes Congestion by High/Low pairs.

Thursday, September 4, 2008

The Ultimate Trade Setup using Bollinger Bands

Markets move between low volatility trading range moves to high Volatility trend moves. One of the best ways to see this taking place is with the Bollinger Bands. When a market makes a extremely narrow range move, the Bollinger Bands will noticably narrow together. When the bands narrow down, it shows an extremely low volatiltiy market. A low volatility market forecasts - a high volatility trend move is more than likely - just around the corner. This is a big trading setup and a money making opportunity is at hand. The Bands narrowing together does not forecast the direction that the breakout will be but often times it is fairly clear from classic technical analysis which way the odds favor the breakout to be.

WHEAT - A NARROW RANGE BASE

At the beginning of this chart from 3/20/03 to 5/06/03 Wheat made a narrow range base pattern. The Bollinger Bands narrowed down. There was no doubt that a low volatility move was happening. This put us on alert that this was a Million Dollar trade setup. A possible trading opportunity was at hand, Wheat exploded to the upside from there

SOYBEANS - BLAST OFF!

On 8/08/03 The Bollinger Bands moved extremely close together The trade setup stuck out like a sore thumb. There was no missing this one Beans exploded above the bands and the rest is history.

NATURAL GAS

The below write up and chart was sent out to my newsletter subscribers. Before Natural Gas made the big move: This chart of Natural Gas is making a narrow range. We could start taking parabolic buy and sell signals until we caught the trend. Also we could wait for a breakout and look for the bands to expand. That would show us the direction of the breakout. Then we could hop aboard in the direction of the trend since Natural Gas has been in a downtrend and is making a base. Odds favor that this market will explode to the upside.

Here's what has happened since the above was written. Natural Gas has exploded to the upside. Notice how The Bollinger Bands went from narrow range (Low Volatility) and are expanding with the rally (High Volatility).

This gives us alot of trading information

#1 - A Major Low is most likely in - this market should continue to rally
#2 - Since the bands expanded as the market rallied
The trend should continue much higher from here
#3 - We can buy all corrections in this market from here

Of Course we have to monitor the market on a daily basis. Any of this can change at any time. But as today the above market analysis is good. A low is in - stay bullish - look for places to buy. As always use a stop if wrong on all trades.

A FEW MORE CHARTS

STOCKS

Here are some examples of stocks making a narrow range and then a strong move.

THE ENTRY SIGNAL

The parabolic stop indicator is a great way to make sure you are on board for the big move and a good indicator to use as a stop. Sometimes it takes a couple of trys to get aboard the big move. The parabolic is a stop and reverse trading system. The parabolic will work excellent as an entry signal then use the parabolic stop and reverse signal to change positions in the market if need be

So you use the parabolic to:

#1 - Enter the market
#2 - As a stop if wrong on the entry signal
#3 - As a new entry point to go with the market the other direction if need be

The parabolic indicator is just one idea for an entry signal. You can use whatever entry signal works for you. When you see a low volatility market.

The reason it may take a couple trys to get in the market on the right side of the big trend move is because the market may make a false breakout. For example the market may make a base and be ready to make a strong rally but first may make a strong move below the base. This is called a false breakout or head fake. Then the real move may begin and the market will rally from there. The false breakout can be in either direction and sometimes there may be a couple of false moves.

Years ago the late Bruce Babcock of Commodity Traders Consumers Review interviewed me for that publication. After the interview we chatted for a while--the interviewing gradually reversed--and it came out that his favorite commodity trading approach was the volatility breakout. I could hardly believe my ears. Here is the fellow who had examined more trading systems--and done so rigorously--than anyone with the possible exception of John Hill of Futures Truth and he was saying that his approach of choice to trading was the volatility-breakout system? The very approach that I thought best for trading after a lot of investigation?

Perhaps the most elegant direct application of Bollinger Bands is a volatility breakout system. These systems have been around a long time and exist in many varieties and forms. The earliest breakout systems used simple averages of the highs and lows, often shifted up or down a bit. As time went on average true range was frequently a factor.

There is no real way of knowing when volatility, as we use it now, was incorporated as a factor, but one would surmise that one day someone noticed that breakout signals worked better when the averages, bands, envelopes, etc., were closer together and the volatility breakout system was born. (Certainly the risk-reward parameters are better aligned when the bands are narrow, a major factor in any system.)

Our version of the venerable volatility breakout system utilizes BandWidth to set the precondition and then takes a position when a breakout occurs. There are two choices for a stop/exit for this approach. First, Welles Wilder's Parabolic3, a simple, but elegant, concept. In the case of a stop for a buy signal, the initial stop is set just below the range of the breakout formation and then incremented upward each day the trade is open. Just the opposite is true for a sell. For those willing to pursue larger profits than those afforded by the relatively conservative Parabolic approach, a tag of the opposite band is an excellent exit signal. This allows for corrections along the way and results in longer trades. So, in a buy use a tag of the lower band as an exit and in a sell use a tag of the upper band as an exit.

The major problem with successfully implementing Method I is something called a head fake--discussed in the prior chapter. The term came from hockey, but it is familiar in many other arenas as well. The idea is a player with the puck skates up the ice toward an opponent. As he skates he turns his head in preparation to pass the defender; as soon as the defenseman commits, he turns his body the other way and safely snaps his shot. Coming out of a Squeeze, stocks often do the same; they'll first feint in the wrong direction and then make the real move. Typically what you'll see is a Squeeze, followed by a band tag, followed in turn by the real move. Most often this will occur within the bands and you won't get a breakout signal until after the real move is under way. However, if the parameters for the bands have been tightened, as so many who use this approach do, you may find yourself with the occasional small whipsaw before the real trade appears. Some stocks, indices, etc are more prone to head fakes than others. Take a look at past Squeezes for the item you are considering and see if they involved head fakes. Once a faker?

For those who are willing to take a non-mechanical approach trading head fakes, the easiest strategy is to wait until a Squeeze occurs--the precondition is set--then look for the first move away from the trading range. Trade half a position the first strong day in the opposite direction of the head fake, adding to the position when the breakout occurs and using a parabolic or opposite band tag stop to keep from being hurt.

Where head fakes aren't a problem, or the band parameters aren't set tight enough for those that do occur to be a problem, you can trade Method I straight up. Just wait for a Squeeze and go with the first breakout.

Volume indicators can really add value. In the phase before the head fake look for a volume indicator such as Intraday Intensity or Accumulation Distribution to give a hint regarding the ultimate resolution. MFI is another indicator that can be useful to improve success and confidence. These are all volume indicators and are taken up in Part IV.

The parameters for a volatility breakout system based on The Squeeze can be the standard parameters: 20-day average and +/- two standard deviation bands. This is true because in this phase of activity the bands are quite close together and thus the triggers are very close by. However, some short-term traders may want to shorten the average a bit, say to 15 periods and tighten the bands a bit, say to 1.5 standard deviations.

There is one other parameter that can be set, the look-back period for the Squeeze. The longer you set the look-back period--recall that the default is six months--the greater the compression you'll achieve and the more explosive the set ups will be. However, there will be fewer of them. There is always a price to pay it seems.

Method I first detects compression through The Squeeze and then looks for range expansion to occur and goes with it. An awareness of head fakes and volume indicator confirmation can add significantly to the record of this approach. Screening a reasonable size universe of stocks--at least several hundred--ought to find at least several candidates to evaluate on any given day.

Look for your Method I setups carefully and then follow them as they evolve. There is something about looking at a large number of these setups, especially with volume indicators, that instructs the eye and thus informs the future selection process as no hard and fast rules ever can

Disclaimer - I am not a stock or commodity trading advisor. The information on this site is for trading education only. There are no trading recommendations for any one individual made on this site and this information is paper trades for trading education. All trades are extemely risky and only risk capital should be used when trading.

U.S. Government Required Disclaimer - Commodity Futures Trading Commission Futures and Options trading has large potential rewards, but also large potential risk. You must be aware of the risks and be willing to accept them in order to invest in the futures and options markets. Don't trade with money you can't afford to lose. This is neither a solicitation nor an offer to Buy/Sell futures or options. No representation is being made that any account will or is likely to achieve profits or losses similar to those discussed on this web site. The past performance of any trading system or methodology is not necessarily indicative of future results.

CFTC RULE 4.41 - HYPOTHETICAL OR SIMULATED PERFORMANCE RESULTS HAVE CERTAIN LIMITATIONS. UNLIKE AN ACTUAL PERFORMANCE RECORD, SIMULATED RESULTS DO NOT REPRESENT ACTUAL TRADING. ALSO, SINCE THE TRADES HAVE NOT BEEN EXECUTED, THE RESULTS MAY HAVE UNDER-OR-OVER COMPENSATED FOR THE IMPACT, IF ANY, OF CERTAIN MARKET FACTORS, SUCH AS LACK OF LIQUIDITY. SIMULATED TRADING PROGRAMS IN GENERAL ARE ALSO SUBJECT TO THE FACT THAT THEY ARE DESIGNED WITH THE BENEFIT OF HINDSIGHT. NO REPRESENTATION IS BEING MADE THAT ANY ACCOUNT WILL OR IS LIKELY TO ACHIEVE PROFIT OR LOSSES SIMILAR TO THOSE SHOWN.

Sunday, August 24, 2008

Symmetrical Triangles

Symmetrical triangle patterns can be found in almost any market and any time frame. They normally signify some indecision in the market and as the pattern develops it is common to see a decrease in volume. The pattern forms as the bar's highs and lows inside the triangle converge so as to outline the shape of a triangle.

Symmetrical triangles have a tendency to break in the direction of the preceding trend and are often accompanied by heavy volume. Although this is often the case it is not a given and regardless of the direction of the break there are normally good opportunities to trade the breakout.

The fast way to tell if it's a bullish or bearish triangle is to find the first point of contact farthest to the left inside the triangle (see chart example). If the first point of the triangle is at the top left then it is a bullish triangle. If the first
point in the triangle is in the bottom left then it is a bearish triangle.

To find a potential target of a triangle you can measure the base of the triangle and then add or subtract that from the breakout point. Lets assume that point 1 in our bullish triangle is 95 and point 2 in the triangle is 80. If you take 80 from 95 you get 15. Now lets assume the breakout point is 88. You add 15 to the breakout point to get 103. Therefore 103 is the target area for the breakout.

The same applies to the bearish triangle. If point 1 were 80 and point 2 were 95 you would still deduct 80 from 95 to get 15. If you get a breakout point of 85 you would now deduct 15 from 85 to get 70 as a potential target point.

In the example of the Japanese Yen (see second chart) point 1 was 111.71 and point 2 was 102.00 which gave us a base of 9.71. The breakout occurred at approximately 108.90. If we add 9.71 to 108.90 it gave us a target of 118.61.

Although symmetrical triangle can often mean continuation of the trend this particular triangle (second chart) formed at the end of a downtrend and broke up.

Thursday, August 14, 2008

Rectangles

Rectangles can occur in any time frame and any market you are following. As with many chart patterns the pattern is in the eye of the beholder. I have found that some traders are better than others at identifying chart patterns. It may take some time before you can spot the most common patterns.

The rectangle contains price movement between two points in a rectangular shape to which we add lines to signify the upper boundary and lower boundary. These lines should be horizontal. Slanted rectangle will most probably fall into the realm of ''Flags'', which we will discus in another lesson.

The top line should connect at least two bars and the bottom line should connect at least two bars. As most markets are in congestion most of the time rectangles are fairly common.

It is not necessary to draw the top and lower lines at the extreme of the congestion points but rather make sure the lines contain at least 95% of the congestion area. The longer the rectangle continues the more important the breakout.

To help identify a valid breakout there should be an increase in volume on the day (or time period) of the breakout. The breakout can occur in either direction but if you are in a defined up trend then an upside breakout is favored and vise versa for a down trend. If I am in a defined trend then I tend to view this pattern as a continuation patter unless it starts to break the other way.

There are a number of ways to trade the rectangle. You can buy or sell the breakout as it happens or you can wait to see if there is a pullback to the neckline (see charts). Once you have defined the rectangle you can also buy and sell at the boundaries of the rectangle. I prefer to buy at the lower boundary if in an up trend and sell at the upper boundary if in a down trend. This can be a very effective trade as the risk is small. If you sell at the upper boundary then your stop loss can be close to the boundary and vise versa for the long trade at the lower boundary.

If you sell the breakout place your protective stop inside the rectangle and do the same for buying the upside breakout. You can also measure the distance between the upper and lower boundaries and project the distance forward to get an indication of the size of the next move. If the distance from the upper to the lower boundary were 20 ticks then I would expect the next move to be at least 20 ticks.

Monday, August 4, 2008

Outside Day Trading

Outside days can occur frequently on daily charts. The secret of the outside day is the bigger the better and it has more meaning if found at the end of a trend.

They can be short lived and I always take my profit quickly. The outside day (OD) should completely encompass the previous day. It must have a higher high than the previous day and a lower low than the previous day.

One of the most important things about this pattern is that the bar closes in the opposite direction of the trend. If the trend is down the close on the OD must be near the high or in the upper part of the bar. The opposite is true of the up trend. The OD may still work if this is not the case but my research show that it is more effective if it does close in the opposite direction.

A great example of this happened on the cash Dow as I was trading it (24th July 02, refer to chart). I like to trade this in two ways. First, depending on what the market has been doing prior to the outside day I will place a entry order a few ticks above the high of the OD if the trend has been down and I am looking to get long. Once I am in the market I will place my stop loss either as a dollar amount or at the .618 fibonacci retracement of the OD.

If you don't know anything about fibonacci don't worry, we will cover that in future lessons. The same applies to the short trade. If the OD occurred at the end of an up trend and I am trying to get short, I will place my entry order a few ticks below the low of the OD. Once taken short I will place my stop loss order in the same way as the long trade, either as a dollar amount or as the .618 fibonacci retracement.

The second way I like to trade this pattern is to trade it intraday. I closely monitor what happens at the high of the OD if I intend to go long and the low of the OD if I intend to go short.

Once the high or low has been taken as the case may be I will then enter the market on a 5 minute or 1 minute chart. For long position I will buy the first retracement with a tight stop loss order under an intraday support and if trying to get short I will sell the first rally with a stop loss order above an intraday resistance.

Below are two examples of Outside Days. The first occurred at the end of a down trend and the second occurred at the end of an up trend.