Thursday, September 4, 2008

The Ultimate Trade Setup using Bollinger Bands

Markets move between low volatility trading range moves to high Volatility trend moves. One of the best ways to see this taking place is with the Bollinger Bands. When a market makes a extremely narrow range move, the Bollinger Bands will noticably narrow together. When the bands narrow down, it shows an extremely low volatiltiy market. A low volatility market forecasts - a high volatility trend move is more than likely - just around the corner. This is a big trading setup and a money making opportunity is at hand. The Bands narrowing together does not forecast the direction that the breakout will be but often times it is fairly clear from classic technical analysis which way the odds favor the breakout to be.

WHEAT - A NARROW RANGE BASE

At the beginning of this chart from 3/20/03 to 5/06/03 Wheat made a narrow range base pattern. The Bollinger Bands narrowed down. There was no doubt that a low volatility move was happening. This put us on alert that this was a Million Dollar trade setup. A possible trading opportunity was at hand, Wheat exploded to the upside from there

SOYBEANS - BLAST OFF!

On 8/08/03 The Bollinger Bands moved extremely close together The trade setup stuck out like a sore thumb. There was no missing this one Beans exploded above the bands and the rest is history.

NATURAL GAS

The below write up and chart was sent out to my newsletter subscribers. Before Natural Gas made the big move: This chart of Natural Gas is making a narrow range. We could start taking parabolic buy and sell signals until we caught the trend. Also we could wait for a breakout and look for the bands to expand. That would show us the direction of the breakout. Then we could hop aboard in the direction of the trend since Natural Gas has been in a downtrend and is making a base. Odds favor that this market will explode to the upside.

Here's what has happened since the above was written. Natural Gas has exploded to the upside. Notice how The Bollinger Bands went from narrow range (Low Volatility) and are expanding with the rally (High Volatility).

This gives us alot of trading information

#1 - A Major Low is most likely in - this market should continue to rally
#2 - Since the bands expanded as the market rallied
The trend should continue much higher from here
#3 - We can buy all corrections in this market from here

Of Course we have to monitor the market on a daily basis. Any of this can change at any time. But as today the above market analysis is good. A low is in - stay bullish - look for places to buy. As always use a stop if wrong on all trades.

A FEW MORE CHARTS

STOCKS

Here are some examples of stocks making a narrow range and then a strong move.

THE ENTRY SIGNAL

The parabolic stop indicator is a great way to make sure you are on board for the big move and a good indicator to use as a stop. Sometimes it takes a couple of trys to get aboard the big move. The parabolic is a stop and reverse trading system. The parabolic will work excellent as an entry signal then use the parabolic stop and reverse signal to change positions in the market if need be

So you use the parabolic to:

#1 - Enter the market
#2 - As a stop if wrong on the entry signal
#3 - As a new entry point to go with the market the other direction if need be

The parabolic indicator is just one idea for an entry signal. You can use whatever entry signal works for you. When you see a low volatility market.

The reason it may take a couple trys to get in the market on the right side of the big trend move is because the market may make a false breakout. For example the market may make a base and be ready to make a strong rally but first may make a strong move below the base. This is called a false breakout or head fake. Then the real move may begin and the market will rally from there. The false breakout can be in either direction and sometimes there may be a couple of false moves.

Years ago the late Bruce Babcock of Commodity Traders Consumers Review interviewed me for that publication. After the interview we chatted for a while--the interviewing gradually reversed--and it came out that his favorite commodity trading approach was the volatility breakout. I could hardly believe my ears. Here is the fellow who had examined more trading systems--and done so rigorously--than anyone with the possible exception of John Hill of Futures Truth and he was saying that his approach of choice to trading was the volatility-breakout system? The very approach that I thought best for trading after a lot of investigation?

Perhaps the most elegant direct application of Bollinger Bands is a volatility breakout system. These systems have been around a long time and exist in many varieties and forms. The earliest breakout systems used simple averages of the highs and lows, often shifted up or down a bit. As time went on average true range was frequently a factor.

There is no real way of knowing when volatility, as we use it now, was incorporated as a factor, but one would surmise that one day someone noticed that breakout signals worked better when the averages, bands, envelopes, etc., were closer together and the volatility breakout system was born. (Certainly the risk-reward parameters are better aligned when the bands are narrow, a major factor in any system.)

Our version of the venerable volatility breakout system utilizes BandWidth to set the precondition and then takes a position when a breakout occurs. There are two choices for a stop/exit for this approach. First, Welles Wilder's Parabolic3, a simple, but elegant, concept. In the case of a stop for a buy signal, the initial stop is set just below the range of the breakout formation and then incremented upward each day the trade is open. Just the opposite is true for a sell. For those willing to pursue larger profits than those afforded by the relatively conservative Parabolic approach, a tag of the opposite band is an excellent exit signal. This allows for corrections along the way and results in longer trades. So, in a buy use a tag of the lower band as an exit and in a sell use a tag of the upper band as an exit.

The major problem with successfully implementing Method I is something called a head fake--discussed in the prior chapter. The term came from hockey, but it is familiar in many other arenas as well. The idea is a player with the puck skates up the ice toward an opponent. As he skates he turns his head in preparation to pass the defender; as soon as the defenseman commits, he turns his body the other way and safely snaps his shot. Coming out of a Squeeze, stocks often do the same; they'll first feint in the wrong direction and then make the real move. Typically what you'll see is a Squeeze, followed by a band tag, followed in turn by the real move. Most often this will occur within the bands and you won't get a breakout signal until after the real move is under way. However, if the parameters for the bands have been tightened, as so many who use this approach do, you may find yourself with the occasional small whipsaw before the real trade appears. Some stocks, indices, etc are more prone to head fakes than others. Take a look at past Squeezes for the item you are considering and see if they involved head fakes. Once a faker?

For those who are willing to take a non-mechanical approach trading head fakes, the easiest strategy is to wait until a Squeeze occurs--the precondition is set--then look for the first move away from the trading range. Trade half a position the first strong day in the opposite direction of the head fake, adding to the position when the breakout occurs and using a parabolic or opposite band tag stop to keep from being hurt.

Where head fakes aren't a problem, or the band parameters aren't set tight enough for those that do occur to be a problem, you can trade Method I straight up. Just wait for a Squeeze and go with the first breakout.

Volume indicators can really add value. In the phase before the head fake look for a volume indicator such as Intraday Intensity or Accumulation Distribution to give a hint regarding the ultimate resolution. MFI is another indicator that can be useful to improve success and confidence. These are all volume indicators and are taken up in Part IV.

The parameters for a volatility breakout system based on The Squeeze can be the standard parameters: 20-day average and +/- two standard deviation bands. This is true because in this phase of activity the bands are quite close together and thus the triggers are very close by. However, some short-term traders may want to shorten the average a bit, say to 15 periods and tighten the bands a bit, say to 1.5 standard deviations.

There is one other parameter that can be set, the look-back period for the Squeeze. The longer you set the look-back period--recall that the default is six months--the greater the compression you'll achieve and the more explosive the set ups will be. However, there will be fewer of them. There is always a price to pay it seems.

Method I first detects compression through The Squeeze and then looks for range expansion to occur and goes with it. An awareness of head fakes and volume indicator confirmation can add significantly to the record of this approach. Screening a reasonable size universe of stocks--at least several hundred--ought to find at least several candidates to evaluate on any given day.

Look for your Method I setups carefully and then follow them as they evolve. There is something about looking at a large number of these setups, especially with volume indicators, that instructs the eye and thus informs the future selection process as no hard and fast rules ever can

Disclaimer - I am not a stock or commodity trading advisor. The information on this site is for trading education only. There are no trading recommendations for any one individual made on this site and this information is paper trades for trading education. All trades are extemely risky and only risk capital should be used when trading.

U.S. Government Required Disclaimer - Commodity Futures Trading Commission Futures and Options trading has large potential rewards, but also large potential risk. You must be aware of the risks and be willing to accept them in order to invest in the futures and options markets. Don't trade with money you can't afford to lose. This is neither a solicitation nor an offer to Buy/Sell futures or options. No representation is being made that any account will or is likely to achieve profits or losses similar to those discussed on this web site. The past performance of any trading system or methodology is not necessarily indicative of future results.

CFTC RULE 4.41 - HYPOTHETICAL OR SIMULATED PERFORMANCE RESULTS HAVE CERTAIN LIMITATIONS. UNLIKE AN ACTUAL PERFORMANCE RECORD, SIMULATED RESULTS DO NOT REPRESENT ACTUAL TRADING. ALSO, SINCE THE TRADES HAVE NOT BEEN EXECUTED, THE RESULTS MAY HAVE UNDER-OR-OVER COMPENSATED FOR THE IMPACT, IF ANY, OF CERTAIN MARKET FACTORS, SUCH AS LACK OF LIQUIDITY. SIMULATED TRADING PROGRAMS IN GENERAL ARE ALSO SUBJECT TO THE FACT THAT THEY ARE DESIGNED WITH THE BENEFIT OF HINDSIGHT. NO REPRESENTATION IS BEING MADE THAT ANY ACCOUNT WILL OR IS LIKELY TO ACHIEVE PROFIT OR LOSSES SIMILAR TO THOSE SHOWN.

Sunday, August 24, 2008

Symmetrical Triangles

Symmetrical triangle patterns can be found in almost any market and any time frame. They normally signify some indecision in the market and as the pattern develops it is common to see a decrease in volume. The pattern forms as the bar's highs and lows inside the triangle converge so as to outline the shape of a triangle.

Symmetrical triangles have a tendency to break in the direction of the preceding trend and are often accompanied by heavy volume. Although this is often the case it is not a given and regardless of the direction of the break there are normally good opportunities to trade the breakout.

The fast way to tell if it's a bullish or bearish triangle is to find the first point of contact farthest to the left inside the triangle (see chart example). If the first point of the triangle is at the top left then it is a bullish triangle. If the first
point in the triangle is in the bottom left then it is a bearish triangle.

To find a potential target of a triangle you can measure the base of the triangle and then add or subtract that from the breakout point. Lets assume that point 1 in our bullish triangle is 95 and point 2 in the triangle is 80. If you take 80 from 95 you get 15. Now lets assume the breakout point is 88. You add 15 to the breakout point to get 103. Therefore 103 is the target area for the breakout.

The same applies to the bearish triangle. If point 1 were 80 and point 2 were 95 you would still deduct 80 from 95 to get 15. If you get a breakout point of 85 you would now deduct 15 from 85 to get 70 as a potential target point.

In the example of the Japanese Yen (see second chart) point 1 was 111.71 and point 2 was 102.00 which gave us a base of 9.71. The breakout occurred at approximately 108.90. If we add 9.71 to 108.90 it gave us a target of 118.61.

Although symmetrical triangle can often mean continuation of the trend this particular triangle (second chart) formed at the end of a downtrend and broke up.

Thursday, August 14, 2008

Rectangles

Rectangles can occur in any time frame and any market you are following. As with many chart patterns the pattern is in the eye of the beholder. I have found that some traders are better than others at identifying chart patterns. It may take some time before you can spot the most common patterns.

The rectangle contains price movement between two points in a rectangular shape to which we add lines to signify the upper boundary and lower boundary. These lines should be horizontal. Slanted rectangle will most probably fall into the realm of ''Flags'', which we will discus in another lesson.

The top line should connect at least two bars and the bottom line should connect at least two bars. As most markets are in congestion most of the time rectangles are fairly common.

It is not necessary to draw the top and lower lines at the extreme of the congestion points but rather make sure the lines contain at least 95% of the congestion area. The longer the rectangle continues the more important the breakout.

To help identify a valid breakout there should be an increase in volume on the day (or time period) of the breakout. The breakout can occur in either direction but if you are in a defined up trend then an upside breakout is favored and vise versa for a down trend. If I am in a defined trend then I tend to view this pattern as a continuation patter unless it starts to break the other way.

There are a number of ways to trade the rectangle. You can buy or sell the breakout as it happens or you can wait to see if there is a pullback to the neckline (see charts). Once you have defined the rectangle you can also buy and sell at the boundaries of the rectangle. I prefer to buy at the lower boundary if in an up trend and sell at the upper boundary if in a down trend. This can be a very effective trade as the risk is small. If you sell at the upper boundary then your stop loss can be close to the boundary and vise versa for the long trade at the lower boundary.

If you sell the breakout place your protective stop inside the rectangle and do the same for buying the upside breakout. You can also measure the distance between the upper and lower boundaries and project the distance forward to get an indication of the size of the next move. If the distance from the upper to the lower boundary were 20 ticks then I would expect the next move to be at least 20 ticks.

Monday, August 4, 2008

Outside Day Trading

Outside days can occur frequently on daily charts. The secret of the outside day is the bigger the better and it has more meaning if found at the end of a trend.

They can be short lived and I always take my profit quickly. The outside day (OD) should completely encompass the previous day. It must have a higher high than the previous day and a lower low than the previous day.

One of the most important things about this pattern is that the bar closes in the opposite direction of the trend. If the trend is down the close on the OD must be near the high or in the upper part of the bar. The opposite is true of the up trend. The OD may still work if this is not the case but my research show that it is more effective if it does close in the opposite direction.

A great example of this happened on the cash Dow as I was trading it (24th July 02, refer to chart). I like to trade this in two ways. First, depending on what the market has been doing prior to the outside day I will place a entry order a few ticks above the high of the OD if the trend has been down and I am looking to get long. Once I am in the market I will place my stop loss either as a dollar amount or at the .618 fibonacci retracement of the OD.

If you don't know anything about fibonacci don't worry, we will cover that in future lessons. The same applies to the short trade. If the OD occurred at the end of an up trend and I am trying to get short, I will place my entry order a few ticks below the low of the OD. Once taken short I will place my stop loss order in the same way as the long trade, either as a dollar amount or as the .618 fibonacci retracement.

The second way I like to trade this pattern is to trade it intraday. I closely monitor what happens at the high of the OD if I intend to go long and the low of the OD if I intend to go short.

Once the high or low has been taken as the case may be I will then enter the market on a 5 minute or 1 minute chart. For long position I will buy the first retracement with a tight stop loss order under an intraday support and if trying to get short I will sell the first rally with a stop loss order above an intraday resistance.

Below are two examples of Outside Days. The first occurred at the end of a down trend and the second occurred at the end of an up trend.

Thursday, July 24, 2008

Inside Day Trading

Inside days can be very profitable if traded correctly. First of all it is ecessary to identify an inside day.

At the close of the market you are following take a note of the high and low for that day (day two). For it to qualify for an inside day the high must be lower than the high of the previous day (day one) and the low of the day must be higher than that of the previous day.

In other words the bar (day 2) must be inside that of the previous day (day one). This is the set up. I like to trade this in two ways.

The first method is to place a buy order a few ticks above the high of day 2 and a sell order below the low of day 2. Once your orders have been placed it doesn't matter which direction the market goes you will have a position.

You can place your stop loss order in one of two ways. You can use a dollar amount or if the inside day (day 2) is not too large you can place a stop loss a few ticks above the high of the inside day for short position.

If you are taken long then your stop loss would be the low of the inside day.

I like this trade to work on day 3 only. If it has not worked on day 3 I cancel the trade. It may still work after day 3 but in my research it tends to make the most gains if it works in day 3.

The second method is to first identify an inside day on a daily chart and then trade it intraday. If you are trading intraday you can monitor price action at the low or the high of day 2 and either enter the market as the high or low of day 2 is taken or enter on the first rally or dip as the case may be on a smaller time frame.

Monday, July 14, 2008

Relative Strength Index

Relative Strength Index was developed by J.Welles Wilder Jr. and introduced in his book 'New Concepts In Technical Trading Systems'. It is one of the most popular technical tools around.

Relative strength Index (RSI) is measured on a scale from 0-100 with a reading above 70 being overbought and a reading below 30 being oversold. Originally he recommended a 14-day period as the setting but many other time periods have now become popular.

Wilder discusses 5 uses of RSI in his book.

Tops and Bottoms

These are indicated when the reading goes above 70 (top) and below 30 (bottom)

Chart Formations

The RSI may form chart formations that may or may not appear on the actual bar chart e.g. you might see a head and shoulders formation on the RSI but not on the bar chart.

Failure Swings

When the RSI goes above 70 or below 30 this is a strong indication that the market is ready for a reversal.

Support and Resistance

It is sometimes more apparent that support or resistance is forming in the RSI than can be seen on the bar chart.

Divergence

When price makes a new high or low and this is not confirmed by the RSI this can be a very strong indication that a reversal is imminent.

My Use Of RSI

My own favorite use of RSI is that of divergence. When the security you are trading makes a new high and the RSI turns down that is bearish divergence.

The same is true of bullish divergence. When price makes a new low and the RSI turns up that is bullish divergence.

I also prefer to see divergence at major tops and bottoms. That is to say, if we have been in an up trend for some time and I am already thinking this might be topping and I see divergence then I am a lot more confident that it has in fact topped and vice versa.

I don't like to use RSI as a sole trigger for a new position but rather I like to use it in combination with other indicators to help build a picture. You will notice that in most cases of divergence the security might make a high reflected on the RSI reading but then the RSI will start to decline as the security makes a another higher high. This is bearish divergence.

If the security makes a low and the RSI also makes a low but begins to turn up at the same time the security makes another lower low then that is bullish divergence.

Friday, July 4, 2008

ADX (Average Directional Index)

History

Average Directional Index (ADX) was developed by J. Welles Wilder Jr. and as its name implies attempts to measure the strength of the direction the security is moving in.

ADX is measured in a scale from 0-100 with readings above 25 indicating that you are in a trend whilst readings below 25 indicate that you are not in a trend.

As the scale is measured from 0-100 it doesn't matter if the trend is up or down, the scale and reading are still from 0-100 e.g. if you were in a strong down trend the reading might be 45. You might get the exact same reading if you were in a strong up trend. The reason I mention this is that many of my students get confused when first introduced to ADX and see the indicator
rising as the trend goes down.

Wilder himself admitted that ''Directional movement is the most fascinating concept I have ever studied'' 'New Concepts In Technical Trading Systems'. Readings of over 60 are fairly rare in my observations and once they are at the extremes can actually mean the direction is getting ready for a change.

My Own use Of ADX

I highly recommend this little technique. You may not get that many signals but when you do they will be high probability. I like to use a 21 period moving average on the time period I am trading.

First the ADX must be 30 or over, no action is taken unless the ADX has achieved this reading.

Next the security must retrace to its 21 period moving average.

Once these two conditions have been met you can enter the market. Once in the market keep two things in mind.

  1. Have a tight stop on the initial entry, perhaps above the most recent high or most recent low depending on direction you are trading or even a dollar amount.
  2. Be aware of the last high or low once in trade e.g. the ADX has a reading 30 or above, the security makes a high and then retraces to the 21 period moving average. Your first target should be the last high or you should at least pay close attention to what happens to price around that level.

The same goes for the short trade. You have a reading of 30 or above and it makes a new low. It then pulls back to the 21 period moving average and you enter short. Your first target should be the previous low or monitor closely at that price level.